FOUNTAINS,
POOL CURBING AND SHELLS ...
Scroll down and click on photos for detail
FOUNTAINS

No. 897
No. 897A
No. 946

No. 946D
No.
946A

No. 946D

No. 946E
No. 1075

No. 947

No. 926
No. 927

No. 1044
No. 1144

No. 1164
No. 1248
No. 669

No. 2062
No. 2062A

No. 2470
No. 2884

No. 2949
No. 4662
No. 4669

No.
4744
POOL CURBINGS SAMPLES
Click here for POOL CURBING, POOLS
and
POOL SHAPES details...

BOWLS & SHELLS

No. 2047

No. 2133

No. 4815
POOL CURBINGS...
The
pool which contains the water is the most crucial element of a fountain. Much can be done with very little water when
properly planned.
Pools
may be virtually any shape you wish. You can
design beautifully shaped pools using our curbing components, which are very simple to
install.
Considering
wind and splash a very good rule to follow is that the pool must be a minimum diameter of
double the height of the jet of water. Wind
may blow the water into the air, to one side or the other and out of the pool. Splash occurs when a drop of water lands back in
the pool. It then may rebound from the surface
in any direction and this can be blown by wind. We
find splash returning as high as 2 or 3 feet depending on the volume and the distance the
water falls.
When
designing these pools great consideration should be given to the depth of the pool. Certainly it is less expensive to build a shallow
pool than a deep pool. Pools as shallow as
6 would be acceptable. However, it may
be necessary to have a sump in the center or a remote pump.
For the most part, fountains are made with depths of water ranging from
8 to 18.
Some
pools are designed purposely to be very shallow, that is with almost no water laying in
the bottom. In this case, the bottom of the
pool becomes merely a drainage area to drain towards the sump. This would be ideal for a childrens
interactive splash fountain.
Our
most popular system is a pool made with our curbing No. 275, which is 10 deep. This makes it possible to operate using a
submersible pump without a sump.
Shown
on these pages is the greatest collection of pool shapes ever offered. They are made from curbing members No. 275 and
others. The shapes shown are approximate. Pool shapes as shown here can be made from our
stock curbing molds generally. To design your
pool, simply select the curbing, shape, and size you desire.
We will draw it for you. Drawings
of components, as are finished drawings, are drawn in AutoCAD and available on disc, on
paper or by email. |